TM 9-2350-287-20-1
7-49. ENGINE BRACKET TO DRIVERS BULKHEAD WIRING HARNESS (12353403)
REPLACEMENT (continued).
4.
5.
6.
b.
1.
2.
3.
Disconnect electrical connector (16) from master relay box (17).
Remove screw (19), two Iockwashers (20),
and terminal lug (21 ) from bilge pump
relay (18). Discard Iockwashers.
Remove wiring harness (7) from vehicle.
INSTALLATION
Position wiring harness (7) in engine
compartment and battery compartment.
Install terminal lug (21 ) on bilge pump
relay (18) with screw (19) and two new
Iockwashers (20).
Connect electrical connector (16) to master
relay box (17).
7-145