TM 9-2350-287-20-1
7-44.
ENGINE DISCONNECT BRACKET TO BULKHEAD WIRING HARNESS (12268418-1) REPLACEMENT
(continued).
2.
Disconnect two electrical connectors (5 and 6) from bulkhead in driver's compartment.
NOTE
An assistant is required for removal of two electrical connectors in battery
compartment.
3.
Remove four screws (14), washers (12), lockwashers (11), and nuts (10) and electrical connector (13) from
bulkhead. Discard lockwashers and reinstall remaining hardware on bulkhead.
4.
Remove four screws (17), washers (19), lockwashers (20), and nuts (21) and electrical connector (18) from
bulkhead. Discard lockwashers and reinstall remaining hardware on bulkhead.
Change 1 7-130