6-4. SURGE TANK HOSES REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
LockWasher (2) (Item 175, Appendix H)
General mechanics tool kit
(Item 24, Appendix I)
Equipment Conditions:
Vehicle parked on level ground (refer to
Materials/Parts:
TM 9-2350-287-1 0).
Adhesive (Item 1, Appendix D)
PowerPack removed (para 3-2).
LockWasher (2) (Item 163, Appendix H)
Cooling system drained (refer to
LockWasher (Item 165, Appendix H)
TM 9-2350-287-10).
a.
1.
2.
3.
4.
REMOVAL
Remove screw (9) and clamp (10) from hose (3).
Loosen nut (8) at elbow (7) on valve support block (6).
Loosen nut (2) at elbow(1) on surge tank (13). Remove
hose (3) from two elbows (1 and 7).
Loosen two clamps (4 and 14) and remove hose (11) from
two elbows (5 and 12).
6-7
TM 9-2350-287-20-1