TM 9-2350-287-20-1
2-8. RADIATOR FAN PROTECTIVE SCREEN REPLACEMENT.
This Task Covers:
a. Installation
b. Removal
Initia Setup:
Tools/Test Equipment:
l Protective screen assembly (Item 45,
Appendix 1)
Equipment Conditions:
l Vehicle parked on level ground (refer to
TM 9-2350-287-10).
l Air intake grille opened and secured
(refer to TM 9-2350-287-10).
a.
INSTALLATION
WARNING
A protective fan screen must be installed
before doing maintenance in the engine
compartment when engine is running or
when running engine in the ground-hop
mode. Contact with rotating fan can
cause injury.
NOTE
Flat side of protective screen should
aline with two lower mounting bolts of
fan housing.
Install protective screen assembly (4) on fan
housing (1), and tighten thumbscrew (2) and nut
(3).
b.
REMOVAL
Loosen nut (3) and thumbscrew (2), and remove
protective screen assembly (4) from fan housing
(1).
FOLLOW-ON MAINTENANCE:
l Close air intake grille (refer to TM 9-2350-287-10).
2-11