TM 9-2350-287-20-1
4-17. FUEL HOSES, LINES, AND FlTTINGS REPLACEMENT (continued).
32.
33.
34.
b.
1.
2.
3.
4.
5.
6.
7.
8.
Disconnect hose (63) from elbow (56) and adapter (52), and remove hose (63) from vehicle.
Remove elbow (56) from lower fuel tank (35).
Remove adapter (52) from upper fuel tank (38).
INSTALLATION
NOTE
Apply Teflon pipe sealant to male threads of all fittings at installation.
Install adapter (52) in upper fuel tank (38).
Install elbow (56) in lower fuel tank (35).
Connect hose (63) to adapter (52) and elbow (56).
NOTE
Do not tighten screws on clamps until after connecting fuel return hose to fuel
distribution fitting.
Install fuel supply hose (17) to hull with two clamps (53), new Iockwashers (54), and screws (55).
Install elbow (62) on hull with nut (61).
Install elbow (59) in lower fuel tank (35).
Connect drain hose (60) to two elbows (59 and 62).
Secure fuel supply hose (17), drain hose (60), and two clamps (58) to hull with screw (57).
4-52