TM 9-2350-287-20-1
4-16. POWERPACK FUEL LINES REPLACEMENT (continued).
22.
Disconnect hose assembly (56) from quick disconnect (57).
23.
Remove two nuts (61), Iockwashers (62), washers (60), screws (65), clamps (59), and hose assembly (66)
from bracket (67). Discard Iockwashers.
24.
Remove quick disconnect (57), quick-disconnect coupling half (58), bushing (63), and elbow (64) from hose
assembly (66).
b.
INSTALLATION
NOTE
Teflon pipe sealant must be applied to male threads of all fittings at installation.
1.
2.
3.
Install elbow (64), bushing (63), quick disconnect (57), and quick-disconnect coupling half (58) on hose
assembly (66).
Secure hose assembly (66) and two clamps (59) to bracket (67) with two screws (65), washers (60), new
Iockwashers (62), and nuts (61).
Connect hose assembly (66) to quick disconnect (57).
4-42