TM 9-2350-287-20-1
3-7. OIL SAMPLER SYSTEM REPLACEMENT.
This Task Covers:
a. Removal
a. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
General mechanics tool kit (Item 24, Appendix I)
Vehicle parked on level ground (refer to
TM 9-2350-287-10).
Materials/Parts:
Transmission access doors opened (refer
Teflon antiseize tape (Item 70, Appendix D)
to TM 9-2350-287-10).
Lockwasher (Item 163, Appendix H)
Lockwasher (2) (Item 183, Appendix H)
a.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Loosen two swivel nuts (10) on tube
(19), and remove tube (19) from
transmission adapter (12) and
adapter (9).
Remove adapter (12) and bushing
(11) from transmission (7).
Disconnect hose (15) from two
elbows (1 and 14).
Remove elbow (14) from oil filter
adapter (13).
Remove screw (18), Iockwasher
(17), and clamp (16) from
transmission (7), and remove hose
(15) from vehicle. Discard
Iockwasher.
Remove two screws (4) and
Iockwashers (5) and mounting
bracket (6) from transmission (7).
Discard Iockwashers.
Remove adapter (9) from drain cock
(8).
Remove elbow (1) from drain cock
(3).
Loosen two nuts (2) on two drain
cocks (3 and 8), and pull two drain
cocks (3 and 8) from mounting
bracket (6).
3-41
REMOVAL