TM 9-2350-287-20-1
3-3. GROUND HOP PROCEDURES (continued).
c.
1.
2.
3.
4.
REMOVAL PROCEDURES
WARNING
Make sure MASTER switch is set to OFF
before disconnecting electrical connectors
of power cable assemblies. Failure to follow
this warning can result in injury to
personnel.
Allow powerpack to cool off before
beginning to remove special equipment.
Hot components can cause severe bums.
NOTE
Perform step 1 only if the vehicle being
used to support the powerpack is one
from which the powerpack was
removed.
Disconnect battery ground cables (para 7-41 ).
Remove screw (43) and two Iockwashers (44) and ground
cable assembly (42) from vehicle.
Remove screw (46), two Iockwashers (45) and ground cable
(42) from transmission.
Install ground cable (47), two Iockwashers (45) and screw (46)
on transmission.
3-29