TM 9-2350-287-20-1
2-19. TROUBLESHOOTING CHART (continued).
w. AFES, CREW (continued).
(1) POWER ON LAMP DOES NOT LIGHT WHEN
MASTER SWITCH IS TURNED ON. All other
electrical systems operate (continued).
B. 2. Disconnect wire harness 12352316 from
bracket-mounted socket 12351461 in drivers
compartment.
3. Place red lead of multimeter in pin socket A
of bracket-mounted socket 12351461 and
ground black lead of multimeter.
4. Check for 24 ± 3 vdc.
5. Place red lead of multimeter in pin socket B
of bracket-mounted socket 12351461 and
ground black lead of multimeter.
6. Check for 24 ± 3 vdc.
Replace wire harness 12352316 (para
7-77). Verify problem is solved.
C.
WARNING
Circuit 10A, if functioning properly,
is a live circuit carrying a constant
24 volts. Exercise proper pre-
cautions when working with this
circuit. Failure to comply will result
in injury to personnel or equipment
damage.
1. Reconnect wire harness 12352316 to bracket-
mounted socket 12351461.
NOTE
Circuit breaker panel no. 2 is
located directly behind engine
AFES T/A panel.
Continued on next page
2-348