TM 9-2350-287-20-1
2-19. TROUBLESHOOTING CHART (continued).
i. NATO SLAVE RECEPTACLES.
The NATO slave receptacle is located in the drivers compartment. When a slave cable is connected between
the NATO slave receptacles on two vehicles, one vehicle can power the other vehicles electrical system. The
disabled vehicle may be powered by turning the MASTER switch to ON in the slave vehicle and setting the
MASTER switch to SLAVE in the disabled vehicle. 24 VDC is supplied to the disabled vehicles master relay,
energizing it, which supplies voltage to the batteries and starting system.
External power receptacle is located at the right rear of the vehicle. This receptacle is used to provide power
from one vehicle to another vehicle by connecting a slave cable between the external power receptacles of both
vehicles, while turning the MASTER switch to ON in the slaving vehicle.
The diagram below shows the connection between the NATO slave and external power receptacles.
2-206