Above 15° F
(+4°C to -260C)
(+40C to -54°C)
D - Day; Daily
A - Annually
18 1/2 gal.
8. HYDRAULIC RESERVOIR LEVEL CHECK.
Take necessary precautions td prevent entry of contaminants into hydraulic system.
An assistant is needed for this procedure.
Turn MASTER switch to ON and check fluid level gage (10), located on hydraulic control panel. Gage pointer should read
within green range. If fluid level is low, open center top loading door (12) and remove hydraulic reservoir fill cap (11).
While assistant monitors fluid level on gage, add OHT until fluid level rises to full (F) mark on gage.