Drycleaning solvent(P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in
a well-ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors. Keep
away from heat or flame. Never smoke when using solvent; the flashpoint for type I drycleaning solvent
is i 00°F (380C) and for type II is 138°F (500C). Failure to do so may result in Injury or death to
If personnel become dizzy while using cleaning solvent, Immediately get fresh air and medical help. If
solvent contacts skin or clothes, flush with cold water. If solvent contacts eyes, immediately flush eyes
with water and get immediate medical attention.
1. Lift up one comer of old decal. Slowly peel decal from surface. If decal rips or tears, use a rag and drycleaning solvent
to help loosen sticky substance or adhesive backing. Scrub decal from surface. Dry surface using a rag (Item 40,
Appendix D). Discard decal.
Surface area must be clean and dry before attaching new decal.
2. Remove protective backing from new decal. Position decal on surface. Using a dry rag, press decal into position starting
from its center. Press outward to remove any air bubbles.