SLAVE STARTING DISABLED VEHICLE USING MAIN ENGINE (continued)
Disconnect slave cable (5) from slave receptacle (4) at each vehicle.
Turn both MASTER switches to ON again.
After disconnecting slave cable, run both engines at 1000 rpm to stabilize generators (alternators) and
DRIVING OVER UNUSUAL TERRAIN
Use first gear. Move steadily to prevent becoming stuck.
If vehicle becomes stuck, do not dig deeper by attempting to drive out. Arrange for towing.
If freezing temperatures are expected, park vehicle on solid ground to prevent tracks from freezing in mud.
When ascending grades, steer as straight as possible. Avoid sharp turns.
It may be possible for vehicle to ride on heavily crusted snow with only occasional breakthrough. To climb back onto
crust, shift into first gear and accelerate slowly to obtain forward movement without slippage.
Drive slowly and cautiously to avoid skidding. If vehicle skids, slow down and proceed with caution. Do not spin