PROJECTILE RACK OPERATION
The two projectile rack assemblies in the M992A1 carry a total of 90 projectiles. The right rack assembly and the left rack
assembly are each arranged in two sets of five rack sections (1). The rack assemblies are mounted against the front wall
of cargo compartment and are removable.
Each rack section has four interlocking blocks (2) that project from its top corners. Four interlocking blocks (3) at the base
of each rack section slip over the legs of the rack section below. Once in place, rack sections are pinned together with
rods (4). Each rack assembly is secured to front wall by brackets (5). Rack assemblies are also secured at top.
A stowage box (6) attaches to top rack section on each rack assembly.
Handle projectiles carefully. Contact between projectiles and fire
extinguisher could cause extinguisher to discharge, resulting in
personal Injury or damage to vehicle.
Right front double seat must be stowed (under APU compartment)
before stowing or removing projectiles from tubes in right lower