OPERATING DOORS (continued)
Make sure conveyor cables are
released from clips on upper rear
door before fully opening upper
rear door. Failure to do this can
result in damage to conveyor
Shift either upper or lower DOOR switch
lever (1 or 2) to UP.
4. When upper rear door (5) has opened
approximately 3-4 feet, release two
conveyor cables (4) from clip (3).
5. Release DOOR switch lever (1 or 2)
when door (5) reaches correct height.
Mechanical safety lock will automatically
engage at door elevations of 45 and 90
Be sure that mechanical safety lock has
engaged, and raise door (5) so that
approximately 1/8 inch exists between
safety lock (6) and either lock stop.