TM 9-2350-277-34
REMOVE SHIPPING CLOSURE AND FRAME (ALL EXCEPT M577A3 AND
M1068A3)
0113 00
THIS WORK PACKAGE COVERS:
Removal (page 0113 00-1).
INITIAL SETUP:
Maintenance Level
Direct Support
Tools and Special Tools
General Mechanics Tool Kit (WP 0120 00, Item 62)
Personnel Required
Track Vehicle Repairer 63H10
Equipment Condition
Carrier delivered to using troops
REMOVAL
NOTE
Do not damage or destroy the closure cover or frame. They can be used again. Turn them in to
supply personnel.
1.
Fold up cover (1). Release 16 straps (2).
2.
Remove eight rods (3) from cover (1).
3.
Remove cover (1) from frame (4).
4.
Remove four screws (5), 12 washers (6), and four tiedown supports (7) from four track shroud retainers (8).
5.
Remove four track shroud bolts (9) and washers (10) from drivers compartment. Install them in four track shroud
retainers (8).
6.
Remove four screws (11), nuts (12), eight washers (13), and four supports (7) from frame (4).
0113 00-1