TM 9-2350-277-34
INSTALL ENGINE COOLANT HEATER KIT (M113A3, M901A3, AND M1059A3 ONLY)
Continued
0075 00
84. Remove two screws (14) and control panel (15) from control box case (16).
85. Remove and discard two screws, nuts, and washers supplied with control box case (16).
86. Install control box case (16) on hull bracket (17). Secure with two screws (18).
87. Install control panel (15) to control box case (16). Secure with two screws (14).
88. Connect circuit 400A lead (19) to control box lead (20).
89. Connect control box connector (1) of wiring harness (2) to control box receptacle (3).
90. Connect main wiring harness 402A lead (4) to coolant heater wiring harness lead (5). Secure wiring harness (2) to front
main (6) with eight straps (7).
0075 00-20