TM 9-2350-277-34
REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) Continued
0032 00
7.
Install guard (14) with four screws (15), new lockwashers (16) and washers (17).
NOTE
Make sure to secure all wiring harness clamps loosened during removal procedure.
8.
Take proper amount of slack out of wiring harness (1) and secure with eight clamps (2), screws (3), and new lockwashers
(4).
9.
Attach wiring harness (1) to bulkhead using two clamps (5), washers (6), new lockwashers (7), and screws (8).
0032 00-8