TM 9-2350-277-34
REPAIR VENTILATING FAN ASSEMBLY Continued
0021 00
8.
If name plate is damaged, replace it (see your -20).
ASSEMBLY
1.
Install gearbox (1) on support (2). Secure with four screws (3), eight washers (4), and four nuts (5).
2.
Install key (6) and fan (7) on shaft (8) or gearbox (1). Secure with new washer (9) and nut (10).
3.
To seat rotor and seal, TORQUE NUT (10) TO 70-75 lb-ft (95-102 N.m). Then remove nut (10) and washer (9).
0021 00-3