TM 9-2350-277-20-6
REPLACE STE/ICE SHUNT GUARD (M981A3 ONLY) Continued
0869 00
INSTALLATION
1.
Install wiring harness (1), two clamps (2), screws (3), new locknuts (4), and four washers (5) on shunt guard (6).
2.
Install shunt guard (6) with attached wiring harness, six screws (7), 12 washers (8), and new locknuts (9) on battery box.
FOLLOW-THROUGH STEPS
1.
Connect battery ground leads (WP 0339 00).
END OF TASK
0869 00-3/4 blank