TM 9-2350-277-20-5
REPLACE M13 NBC HEATER HOSES (M1068A3 ONLY) Continued
0790 00
13. Install three clamps (20) on commanders inlet hose (17). Secure clamps on crossbeam with three screws (21), six
washers (22), and three new locknuts (23).
14. Install clamp (24) on commanders inlet hose (17). Secure clamp on commanders bulkhead with screw (25) and new
lockwasher (26).
15. Secure electrical leads to commanders inlet hose (17) with new straps (27).
16. If lower bracket (28) was removed, install bracket on commanders bulkhead with two screws (29), washers (42), and
new lockwashers (30).
17. If upper bracket (31) was removed, install bracket on commanders bulkhead with two screws (33), washers (38) and
new lockwashers (34).
18. Install commanders outlet hose (35) and clamp (36) on connector (37) and commanders heater (19). Tighten clamp.
0790 00-7