TM 9-2350-277-20-5
REPLACE M3 NBC HEATER HOSES AND FITTINGS (M113A3 ONLY)
0782 00
THIS WORK PACKAGE COVERS:
Removal (page 0782 00-1).
Installation (page 0782 00-4).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanics Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Lockwasher (10)
Straps (as required)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery ground strap disconnected (WP 0337 00)
REMOVAL
1.
Remove commanders station hose (1) from connector (2) and four web straps (3).
2.
If web straps (4) or fastener tape (3) are damaged, remove from bulkhead or top plate, as required.
3.
Cut and remove all straps (5) securing electrical leads (6) to commanders station hose (1). Discard straps.
4.
Remove screw (7), lockwasher (8), and jumper assembly (9) from weld nut (10). Discard lockwashers.
5.
Remove two screws (11), lockwasher (12), washer (13) and clamp (14) from top plate. Remove two clamps from
commanders station hose (1). Discard lockwashers.
0782 00-1