TM 9-2350-277-20-5
REPLACE REAR ARMOR (M113A3 ONLY) Continued
0751 00
2.
Remove eight screws (2), washers (3), two screws (4), washers (5), support (6), pad (7), and armor plate (1) from ramp
(8). Remove lifting device.
3.
Attach lifting device to ramp door armor plate (9).
4.
Remove five screws (10), washers (11), left corner screw (12), two washers (13), and armor plate (9) from ramp door
(14). Remove lifting device.
5.
Remove three screws (15), washers (16), two screws (17), washers (18), support (19), pad (20), and left armor plate (21)
from ramp (8). Have helper assist.
WARNING
Ramp door could fall and injure you. Make sure door is supported properly by a lifting device
before removing hinge screws.
0751 00-2