TM 9-2350-277-20-5
INSTALL ARMOR KIT (M113A3 ONLY) Continued
0748 00
9.
Remove four screws (1), locknuts (2), trim vane (3), and hinges (4) from carrier.
10. Remove cotter pin (5) and pin (6) from trim vane clevis (7) and pivot bracket (8). Remove two screws (9), washers (10),
and pivot bracket (8). Discard cotter pin.
11. Remove two screws (11), lockwashers (12), washers (13), and handle (14) from plate (15). Discard screws, save
lockwashers.
12. Install extension (16) on plate (15) with two new lockwashers (17), washers (18), and screws (19).
13. Install handle (14) on extension (16) with two lockwashers (12), washers (13) and new screws (11).
0748 00-3