TM 9-2350-277-20-5
BLEED AIR FROM PERSONNEL HEATER FUEL LINES Continued
0679 00
4.
Loosen fuel outlet line (3) at fuel pump (2). Tighten connection as soon as fuel begins to escape from line.
5.
Wipe up spilled fuel. Turn heater on (see your -10).
6.
Loosen fuel line (4) at inlet elbow (5) of heater (6). Tighten connection as soon as fuel begins to escape from line.
7.
Wipe up spilled fuel. Check heater (6) for proper operation and fuel leaks.
8.
Turn heater off (see your -10).
FOLLOW-THROUGH STEPS
1.
Install rear floor plate (WP 0539 00), (WP 0540 00), (WP 0541 00), (WP 0542 00), (WP 0543 00), (WP 0544 00),
or(WP 0545 00).
2.
Start engine (see your -10).
3.
Raise and lock ramp (see your -10).
4.
Stop engine (see your -10).
END OF TASK
0679 00-2