REPLACE AUXILIARY POWER UNIT VALVE-TO-BULKHEAD FUEL SUPPLY HOSES
(M577A3 AND M1068A3 ONLY) Continued
Replacing a flareless fuel hose may also require new mating fittings such as a nipple.
Connect fuel hose (2) to nipple (9) in bulkhead crossbeam. Route hose to rear of carrier.
Install clamp (7) on fuel hose (2) Secure clamp to weldnut on hull floor and to side of seat support with screw (5) and
new lockwasher (6). Install new strap (8) around fuel hose (2) and other hose (3)
Secure fuel hose (2) to other hoses (3) with nine straps (4).
Secure fuel hose (2) to other hoses (3) with six new straps (1).