TM 9-2350-277-20-5
REPLACE RAMP HYDRAULIC PUMP Continued
0655 00
FOLLOW-THROUGH STEPS
1.
Install exhaust elbows (WP 0221 00).
2.
Install air cleaner (WP 0168 00).
3.
Fill hydraulic reservoir (WP 0671 00).
4.
Start engine (see your -10).
5.
Check for leaks.
6.
Raise and lower ramp several times to bleed air from system (see your -10).
7.
Raise and lock ramp (see your -10).
8.
Stop engine (see your -10).
9.
Turn MASTER SWITCH OFF (see your -10).
10. Close power plant front access door (see your -10).
11. Raise trim vane (see your -10).
END OF TASK
0655 00-4