TM 9-2350-277-20-4
REPLACE/REPAIR ANTENNA MAST BRACKET ASSEMBLY, TAILLIGHT WIRING
HARNESS, AND BRACKET (M1068A3 ONLY) Continued
0625 00
NOTE
There are two circuit leads 23 and 24. One set connects inside the vehicle and one set connects
outside the vehicle.
8.
Install shells (1) on wiring harness (2) inside of vehicle.
a.
Install shells (1) on connectors (3)(4).
b.
Install washers (5) for holding pins in place on connectors (3)(4).
c.
Slide shells up connectors (3)(4).
9.
Connect taillight wiring harness (2) inside vehicle.
a.
Connect circuit lead 23 (6) and circuit lead 24 (7) to main rear wiring harness (8).
b.
Install taillight wiring harness (2), clamp (9), new lockwasher (10) and screw (11) to the rear of hull.
0625 00-12