TM 9-2350-277-20-4
REPLACE MISSILE RACK RETAINERS (M901A3 ONLY) Continued
0589 00
3.
Remove two cotter pins (8), washers (9), headed straight pins (10), torsion springs (11), and washers (12) from retainer
latches (13) and latch brackets (7). Remove retainer latches from latch brackets. Discard cotter pins.
INSTALLATION
1.
Install two retainer latches (13) on latch brackets (7). Secure with two washers (12), torsion springs (11), headed straight
pins (10), washers (9), and new cotter pins (8).
2.
Install two latch brackets (7) on carrier with slot toward bulkhead. Secure with four washers (6) and screws (5).
3.
TIGHTEN SCREWS (5) TO 216-264 LB-IN (24-30 N m) TORQUE.
4.
Install two strap retainers (4) on carrier. Secure with four washers (3), new lockwashers (2), and screws (1).
0589 00-2