TM 9-2350-277-20-4
REPLACE RIGHT REARWARD TABLE (M577A3 ONLY) Continued
0582 00
7.
Remove four bumpers (22) from braces (21).
INSTALLATION
1.
Install four bumpers (1) in braces (2).
2.
Install four braces (2) on supports (3) and secure with twelve screws (4), washers (5), and new locknuts (6).
3.
Align four supports (3) and hinges (7) on table top (8). Secure with eight spacers (9) and sixteen screws (10).
NOTE
Shims may be required to obtain clearance between screw and support bracket. Use flat
washers as shims two maximum.
4.
Align table top (8) and supports (3) on hull. Secure with two screws (11), washers (12), and new locknuts (13).
5.
Install three screws (14) through table top (8) and brackets on hull. Secure with three washers (15) and nuts (16).
6.
Align four catches (17) on two drop leaves (18) and secure with eight new lockwashers (19) and screws (20).
0582 00-2