TM 9-2350-277-20-4
REPLACE PUSH-PULL CONTROL ASSEMBLY, BRACKET, LINKS, AND PINS
(CABLE-ACTIVATED LOCK) Continued
0429 00
5.
Disconnect circuit lead 369A (6) and lead 368 (7) from wiring harness.
NOTE
Do not drop locking pin, block, and spring when removing mounting bracket.
6.
Remove two screws (9), washers (10) and mounting bracket (11) from wheel housing (8).
7.
Remove spring (12) from locking pin (13). Remove pin (14) from locking pin (13). Remove block (15) and spring (16)
from locking pin (13). Discard pin.
0429 00-4