TM 9-2350-277-20-3
REPLACE PARKING BRAKE CONTROL CABLE ASSEMBLY Continued
0411 00
6.
Install cable (1) in hole of upper mounting bracket (2).
7.
Install spring (3), third jam nut (4) and washer (5) on cable (1). Install brake stop (6) on cable end. Allow 3/4 inch (1.9
cm) minimum thread engagement into brake stop (6).
WARNING
Failure of control linkage can cause carrier to crash. Crash could kill or injure personnel.
Install new cotter pins and locknuts.
8.
Install brake stop (6) on lower brake pedal lever link (7). Secure with clevis pin (8), two washers (9), and new
cotter pin (10).
0411 00-6