TM 9-2350-277-20-3
REPLACE TRANSMISSION OIL AND OIL FILTER ELEMENT Continued
0398 00
NOTE
Transmission must be serviced with operational lubricant in accordance with transmission tag
on filler neck and your (WP 0155 00).
6.
Fill transmission with oil to bring level between ADD and FULL mark on dipstick (1). See transmission tag on filler
neck and (WP 0155 00).
7.
Install air intake elbow (WP 0173 00).
8.
Turn MASTER SWITCH ON (see your -10).
9.
Run engine for 3 to 5 minutes (see your -10). Check fluid level (WP 0155 00). Transmission oil level should be between
ADD and FULL on dipstick (1). Check for leaks.
FOLLOW-THROUGH STEPS
1.
Stop engine (see your -10).
2.
Install power plant bottom access cover (WP 0450 00).
3.
Close power plant access door (see your -10).
4.
Raise trim vane (see your -10).
END OF TASK
0398 00-4