TM 9-2350-277-20-3
REPLACE TOW START CONTROL ASSEMBLY AND BEARING Continued
0391 00
5.
Remove two straps (1), screws (2), washers (3), and locknuts (4) that secure cable assembly (5) to cable bracket (6).
Remove straps from cable. Discard locknuts.
6.
Remove two screws (7) and washers (8) that secure cable bracket (6) and bearing (9) to top of transmission. Remove
bracket and bearing from transmission.
7.
Remove jam nut (10) and washer (11) from lower end on threaded cable conduit that secures cable assembly (12) in
engine compartment. Remove or discard cable assembly if wire is too short to be secured by collars and wire bent
over itself.
0391 00-4