TM 9-2350-277-20-3
REPLACE TRAILER HARNESS Continued
0375 00
2.
Remove shell connectors from leads (2) (WP 0382 00).
3.
Remove screw (3), clamp (4), lockwasher (5), circuit 90 lead (6), lockwasher (7) from hull weldnut. Discard
lockwashers.
4.
Remove four screws (8) and receptacle cover (9) from ramp. Carefully remove receptacle (10) with attached leads (2)
and gasket (11) from ramp. Discard gasket.
5.
If needed, remove connector (12) from rear bulkhead.
6.
If needed, remove spring (13) and elbow (14) from ramp.
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
1.
Check receptacle. If receptacle is cracked or broken, notify supervisor.
0375 00-2