TM 9-2350-277-20-3
REPLACE BATTERY-TO-RADIO WIRING HARNESS (CKT 48) (M981A3 ONLY)
Continued
0371 00
1.
Remove nut (1) and bolt (2) and disconnect CKT 48 cable assembly (3) from battery.
2.
Remove three screws (4), lockwashers (5), and clamps (6). Discard lockwashers.
3.
Remove screw (7), washer (8), and lead (9) from capacitor (10).
4.
Remove nut (11), lockwasher (12), cover (13), nut (14), lockwasher (15), clamp (16), two leads (17), capacitor (10), and
stud (18) from weldnut (19). Discard lockwashers.
5.
Remove two connector covers (20), eight screws (21), washers (22), lockwashers (23), nuts (24) and remove CKT 48
cable assembly (3). Discard lockwashers.
CLEANING
CLEANING, INSPECTION, AND REPAIR
1.
Clean terminals as needed.
2.
Inspect for damaged connectors and terminals. Repair as needed (WP 0382 00).
0371 00-2