TM 9-2350-277-20-3
REPLACE TRANSMISSION CONTROLLER WIRING HARNESS Continued
0361 00
14. Install wiring harness (18), three clamps (19), new lockwashers (20), and screws (21) on drivers front hull.
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
2.
Install drivers power plant access panel (see your -10).
3.
Close power plant access door (see your -10).
4.
Raise trim vane (see your -10).
5.
Start engine (see your -10). Check that transmission controller works right.
6.
Stop engine (see your -10).
END OF TASK
0361 00-10