TM 9-2350-277-20-3
REPLACE BATTERY TO MASTER SWITCH LEAD (CIRCUIT 6) (M577A3 AND M1068A3
ONLY) Continued
0357 00
2.
Remove circuit 6 lead (6) from battery box (7).
3.
Remove as many straps (8) as necessary to free circuit 6 lead (6) from other harnesses.
4.
Remove three screws (9), lockwashers (10), and five clamps (11) from weldnuts. Discard lockwashers.
5.
Remove three clamps (11) from circuit 6 lead (6).
6.
Tie cord to circuit 6 lead (1) with strong knot. Pull circuit 6 lead (1) through hull transverse beam (2) from opposite side
of carrier. Untie cord from circuit 6 lead (1), leaving cord hanging from both ends of hull transverse beam (2).
7.
Remove two screws (3), lockwashers (4), clamps (5), and circuit 6 lead (1) from weldnuts. Discard lockwashers.
0357 00-2