TM 9-2350-277-20-3
REPLACE RIGHT STOP LIGHT-TAIL LIGHT (M577A3 ONLY) Continued
0301 00
INSTALLATION
1.
If removed, install two studs (7) and (11) in rear of stop light-tail light (8).
2.
Install new gasket (12) and stop light-tail light (8) on carrier hull. Secure right stud (11) with new lockwasher (10) and
nut (9).
3.
Install clamp (6) on stop light-tail light leads (3) and secure to left stud (7) with new lockwasher (5) and nut (4).
4.
Connect circuit 24 lead (2) and circuit 23 lead (1) to stop light-tail light leads (3).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
2.
Turn MASTER SWITCH ON (see your -10).
3.
Operate main light switches to see if right stop light-tail light is operable (see your -10). Turn light switches OFF.
4.
Start engine (see your -10).
5.
Raise and lock ramp (see your -10).
6.
Stop engine (see your -10).
END OF TASK
0301 00-2