TM 9-2350-277-20-2
REPLACE COOLANT AIR SEPARATOR Continued
0236 00
3.
Install drain cock (7) on air separator (3).
4.
Install vent hose (8) on adapter (6). Tighten clamp (9).
5.
Install hose (10) on air separator (3). Tighten two clamps (11).
FOLLOW-THROUGH STEPS
1.
Fill cooling system (WP 0227 00).
2.
Install power plant rear upper access panel (see your -10).
END OF TASK
0236 00-4