REPLACE THROTTLE VALVE (TV) MODULATOR AND LEVER Continued
Apply a light coat of sealing compound to male pipe threads before installation. Do not coat
Install elbow (6) in throttle valve pressure test port on transmission (4) in the 1:00 to 2:00 oclock position.
Install pipe plug (5) in pipe elbow (6).
If preformed packing comes with throttle valve modulator, discard packing. The packing is not
required because there is an oil seal already installed inside the transmission, and the packing
does not allow for proper fit of the modulator into the transmission.
Make sure modulator is in idle position before installing modulator on transmission.
Install modulator (3) in transmission (4). Secure with retainer (2) and new self-locking bolt (1).