CLEAN FUEL CAP VENT AND FILTER SCREEN Continued
If grommet (1) is clogged or dirty, remove and clean with cleaning compound and clean cloth.
Reinstall grommet (1) in fuel cap (2). Make sure it is properly seated.
Air pressure in excess of 30 psi (207 kPa) can injure personnel. Do not direct pressurized air at
yourself or others. Always wear goggles.
Clean screen cap (3) with cleaning compound. Dry with compessed air.
Reinstall screen cap (3) in fuel cap (2).
Squeeze spring plate (4), and install in filler neck (5).
Install fuel cap (2), with attached chain (6) in filler neck (5).
Close ballistic cover (7).
END OF TASK
0176 00-3/4 blank