4-24
Change 1
RETAINING STRAP AND CHANNEL GROUP REPAIR
TM 9-2350-267-34
References:
TM 9-2350-267-10
Equipment Condition:
Upper fuel tank removed (p 4-10)
REMOVAL
A
B
C
D
E
F
G
H
Move right projectile rack to rear (TM 9-2350-267-10).
Remove and discard cotter pin (1).
Remove pin (2).
Remove three screws (3), three nuts (4) and three flat washers
(5).
Remove rear retaining strap assembly (6).
Remove two screws (7) and bracket (8).
NOTE
Nut and retainer are located inside hull crew com-
partment at forward bulkhead.
Remove nut (9) and retainer (10).
Remove channel (11), stud (12), nut (13) and flat washer (14)
through hull recess in engine compartment.
TA312517