COOLING FAN DRIVE ASSEMBLY REPAIR (CONTINUED)
L
M
N
Measure distance from end of gear shaft (23) to flange on retainer (14).
NOTE
Record distance measured in step L as dimension A.
Use shim thickness as determined in step P.
Subtract dimension A from dimension B (step H) and record result
Q Install two new preformed packings (13), shims (12), and two bevel gear
as dimension C.
ease assemblies (11) into fan drive assembly (3) with four screws
(10). Torque screws to 19-21 ft-lb (25-28 Nm).
O
P
Read dimension Z from face of gear shaft (23).
Subtract dimension C (step N) from dimension Z and record result as
the shim (12) thickness required.
5-9
Change 4
TM 9-2350-267-34