TOP LEFT DOOR: REMOVAL AND INSTALLATION (CONTINUED)
REMOVAL
A
B
c
D
E
F
Open and secure top middle door (1).
Remove screw (2), self-locking nut (3) and two flat washers (4)
and allow hold-open bar (5) to hang from support (6). Discard
self-locking nut.
NOTE
Note number and position of shims to ensure pro-
per installation.
Remove four screws (7) and four lockwashers (8), releasing two
hinges (9) and shims (10). Discard lockwashers.
Attach lifting hook of suitable lifting device to door lifting lug
(11) and lift door (12) off vehicle.
Remove two hinges (9) from door (12) by removing four screws
(13) and four lockwashers (14). Discard lockwashers.
Separate two hinge halves (9) by removing spring pin (15) and
driving out hinge pin (16). Discard spring pin.
INSTALLATION
A
B
c
D
E
F
Apply zinc chromate paste (item 46, Appx D) to mating sur-
faces between hinges (9), shims (10), door (12) and vehicle.
Hold one hinge half (9) in vise, with holes for spring pin (15)
facing up. Position mating hinge half (9). Aline hinge pin holes.
Drive hinge pin (16) into place, using care to aline holes for spr-
ing pin (15). Secure with new spring pin (15).
Attach lifting hook of suitable lifting device to door lifting lug
(11). Lift door (12) into position on vehicle.
Install two hinges (9) on top left door (12) with four screws (13)
and four new lockwashers (14). Position shims (1 O) between
hinges (9) and vehicle hull and install four screws (7) and four
new lockwashers (8).
Install hold-open bar (5) on door (12) bracket with screw (2),
two flat washers (4) and new self-locking nut (3).
Close and secure top middle door (1).
9-50.1 /(9-50.2 blank)
Change 1
TM 9-2350-267-20