9-48.2
Change 1
TM 9-2350-267-20
PERSONNEL DOOR HOLD-OPEN LATCH AND BUMPER ASSEMBLY: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION
(CONTINUED)
ASSEMBLY
A
B
c
D
E
Install lubrication fitting (24) in latch body assembly (3).
Install pin (18) and spring (20) in latch body assembly (3).
Hold cover (21) in position on latch body assembly (3) com-
pressing spring (20). Secure cover (21) to latch body assembly
(3) with four screws (22) and four new lockwashers (23).
Hold pin (18). Screw knob (19) on pin (18).
Install rubber bumper (17) in bumper bracket (10) with
headed pin (16) and new cotter pin (15).
INSTALLATION
A Apply zinc chromate paste (item 46, Appx D) between mating
surfaces of latch body (3), shims (4, 5, 6 and 7) bumper bracket
(10), shims (11, 12,13 and 14) and vehicle hull.
B
Install bumper bracket (10) and shims (11, 12, 13 and 14) with
two screws (8) and two new lockwashers (9).
C Install latch body assembly (3) and shims (4, 5, 6 and 7) with
four screws (1) and four new lockwashers (2).