7-40
Change 2
TM 9-2350-267-20
SERVICE BRAKE LINKAGE: ADJUSTMENT
INITIAL SETUP
Equipment Condition:
Vehicle tracks blocked.
ADJUSTMENT
A
B
C
D
E
Open transmission access doors.
Remove cotter pin (1) and clevis pin (2) from shaft lever (3).
Discard cotter pin.
Loosen locknut (4).
Rotate rod end (5) until all slack is removed from brake control
sprocket chain (6) when brake shaft lever index marks are at
0 degrees.
Install clevis pin (2) and new cotter pin (1).
TA57228