SHIFT CONTROL LINKAGE: ADJUSTMENT (CONTINUED)
Y
Z
AA
AB
AC
AD
Loosen two nuts (24).
Adjust shift control outer tube (23). Unscrew until quick-
disconnect pin (22) fits in easily.
Install quick-disconnect pin (22).
Tighten two nuts (24).
WARNING
Verification of shift positions must be
performed prior to starting engine. Failure to
do so may result in personnel injury or damage
to the vehicle.
Move shift selector (1) through all positions. Verify shift selec-
tor (1) setting is same as shift control lever index (16) reading
at all positions.
Close and secure air intake grille and drivers hatch.
TA57227
7-37
Change 2
TM 9-2350-267-20