6-130
TM 9-2350-267-20
NATO INTERVEHICULAR SLAVE CONNECTOR GROUND CABLE (12332678): REMOVAL AND INSTALLATION
REMOVAL
NOTE
Both NATO slave connector ground cables, left
front and left rear, are removed and installed in
same manner.
A To remove rear slave connector ground cable, remove APU
control box (p 13-35 ). and NBC M2A2 air purifier (p 14-3).
B
Remove screw (1) and two lockwashers (2) and disconnect
cable 12332678 (3) from bulkhead ground mount.
C Pull back rubber boot (4) and disconnect opposite end of
cable (3) from NATO slave receptacle (5) by removing screw
(6) and lockwasher (7). Remove cable from vehicle.
INSTALLATION
Reverse removal procedures.
TA311161