6-58
TM 9-2350-267-20
REMOTE CHEMICAL DETECTOR ALARM TERMINALS: REMOVAL AND INSTALLATION
WARNING
Turn OFF MASTER switch. Disconnect battery
ground cables.
NOTE
There are two pairs of terminals. Each pair is in-
stalled on a vehicle-mounted bracket. Each ter-
minal is removed and installed in the same way.
These procedures cover only one terminal.
A Remove nut (1) from terminal (2).
B
Remove cable connector (3).
C Remove flat metal washer (4) and insulating washer (5).
D Pull terminal (2) out of vehicle-mounted bracket along with
insulating washers (6 and 7) and flat metal washer (8).
INSTALLATION
Reverse removal procedures.
TA311089